Quest for the Flying Gurnard

I had never even heard the name, flying gurnard, until the last day of our cruising season in June of 2024. Indigo Lady had been anchored in White House Bay at the southeastern end of St. Kitt’s for a couple of weeks. We had spent several of the latter days at anchor deep cleaning and otherwise preparing Lady to be hauled out for hurricane season. Each afternoon, we’d wrap up our hot, sweaty work somewhere around 3-4 pm and go for a snorkel in the anchorage. On our last day at anchor before heading up to the boatyard, we knocked off work as usual and suited up for a snorkel. We’d snorkeled the area a lot and would see the usual sea life suspects, so this time I decided not to take my camera. I joked with Dave that he should thank me, because it meant we’d see cool stuff. The joke was on me, because that one snorkel excursion revealed to us two banded coral shrimp, several constellations of cushion sea stars sporting 4-6 legs, a mass migration of whelk, a golf ball-sized octopus, and the prize of them all, a flying gurnard!

We were snorkeling over a shallow, sandy patch, maybe twelve feet deep. We both saw the creature at the same time and stopped to examine it. It sort of looked like a lizard fish, of which we’ve seen many, but not quite. Its pectoral fins were quite long, almost the full length of its body, and pointed backward. We popped our heads up and wondered aloud at what it might be, then stuck our heads under water again. Then the creature started to crawl! It looked like there were two tiny hook-like claws near where the pectoral fin joined the body. A crawling fish? 

We popped our heads up again and wondered some more. Dave decided to dive down and encourage it to swim, so back down we went. When he flicked near its tail, the fish opened up “wings” (its pectoral fins) that were edged in a beautiful iridescent blue, and it “flew” across the bottom for several feet before settling again. We were determined to burn the image into our brains so we could identify it later back onboard. As soon as we dried off after our return to Lady, we pulled out our identification book and started searching. We found the flying gurnard. With that name, we searched the internet and found various other pictures that looked just like our fish. What a find! Too bad we could only describe it to people and show them other peoples’ pictures online.

Cruising season 2025 started in January. We spent a few days in that same anchorage, but only had time for a couple of snorkels. We did not see a flying gurnard. In early March, we were in the Îles des Saintes in Guadeloupe. While reading the section of our cruising guide about those islands, we read that flying gurnards could be spotted at Îlet a Cabrit. We snorkeled there four or five times over three days, and again in April once or twice. We saw several species we hadn’t encountered before, but no flying gurnard. Bummer! We kept our eyes peeled during every subsequent snorkel and dive, of which there were many, in Guadeloupe and later Antigua, but we never saw a flying gurnard. Until our last snorkel of the season…

We were back in White House Bay, St. Kitt’s by late May for an early haul out this year. It was a much shorter stay this time, so our close-up tasks were condensed to only three days. We were too exhausted at the ends of the first two days and did not snorkel, but we vowed to snorkel on our last day before moving up to the boat yard for haul out. Into the water we went on that last day, and this time I took my camera. We stopped at every patch of sand we crossed over, searching for the elusive flying gurnard. At last, it happened. We both saw the fish at the same time- lizardfish looking but with pectoral fins too long. We popped up our heads at the same time and planned for Dave to flick its tail and for me to have my camera ready with recording already started. So that’s what we did, and we got video! The fish just scooted away a bit from Dave’s first attempt, without opening its wings, but eventually, Dave coaxed it to display all its glory and I captured it on film. Quest complete! 

So here are a couple of pictures and a video I took of the flying gurnard for you to enjoy. If you’d like to learn more about this fish and its unusual fins, go here.

Home Early

We got back to our land home in the wee hours of May 22nd, about 1:30am, actually. Indigo Lady is nestled into her hurricane holes (they dig holes for the keels in St. Kitt’s), ready to ride out the season until our return.

Why did we come home so early? We had already planned to fly home May 29th so we could settle in and then attend my niece’s high school graduation the following weekend. So really we only came home a week earlier than planned. There were a few factors that contributed to our decision. First of all, when our friend Ian left us, there were still two weeks until our departure for home. We’d seen all of Antigua that we wanted to see, so staying there wasn’t an enticing idea. We wanted to go to Montserrat, but the reality was that we would have been going for the sole purpose, given our timing, of a single day tour. Turned out that the window we would have needed would have made for an uncomfortable ride across the 25 miles of ocean, and then we’d need a decent window to go St. Kitt’s. We didn’t think a single day tour was worth the hassle. Heading directly to St. Kitt’s and spending two weeks there didn’t appeal either. In addition, I had been dealing with gastric issues since February, which were fine when I took Prilosec, but restarted once I finished. On top of that, my back had been bothering me pretty much daily since early April. It was time to see my doctor and get diagnosed and treated, and we all know how long that can take in the US; best to start early. So we decided to just call it a season and come home.

I still have some stuff to post about our cruising season, and will do so at random points during the summer. For now, we have family and friends to catch up with (and a boat to launch, and a garden to work on, and, and, and).

Maybe next time I’ll tell you about our quest for a flying gurnard. Until then, stay safe and take care of each other!

We interrupt the planned post to tell you this…

Well, I was in the middle of writing a post to update you about our past two weeks here in St. Kitt’s & Nevis, but I got interrupted by a potential weather window, which turned into a real (albeit not ideal) window we’re taking to go to Guadeloupe. 

So…we’re leaving at midnight for what will hopefully be not a horrible passage that will hopefully land us in Guadeloupe before sunset Wednesday. I’ll post sometime later this week to let you know how the passage went, and to fill you in on our past couple of weeks.

🙏 🤞🛥

What’s cruising without a few bumps in the road?

We’ve been back in St. Kitt’s for a week and the boat is still not in the water. The boat work we’d asked to have done started the day before we arrived. We told them what we needed done last June when we dropped her off for storage, and again in November, and December, and earlier this month. Last January, the boat work we’d asked for started on the day we arrived, so I suppose this year is an improvement. Island time.The big job that needed doing, which Dave and I could not do, was the bottom copper coat. Dave is extremelyallergic to the hardener in this epoxy-based paint. Before we launched last January, Dave spoke to the then yard manager about the job and learned there is a guy on the island who does it as an outside contractor. We’d buy the supplies in St. Martin and bring them back with us in June, which we did. Dave met the guy in June, at the boatyard, to discuss the job; all seemed good. When November rolled around, nobody could get in touch with him. When we still hadn’t heard anything after Christmas, Dave contacted the yard owner who put Dave in touch with another guy who could do it, I’ll call him Bob. Dave and Bob texted back and forth and Dave said it sounded like Bob knew what he was doing, so told him to go ahead.

We’re pretty sure our boat is the first one Bob has copper coated. First, the hull needs to be sanded and smooth and any pits that don’t sand smooth need to be filled. Our hull is still pitted in places. The time-sensitive, epoxy-based copper coat requires a crew of 3-4 to do it well. Bob had one other guy working with him who was less than dedicated to the work. Finally, the hardened copper coat needs to be sanded smooth. Bob and the other guy showed up Monday with one battery powered sander, no way to recharge it, and not enough sandpaper. By Tuesday morning, with only about one quarter of the final sanding done, Dave suggested buying electric sanders and more paper. Away Dave & Bob went and returned with the needed supplies. That helped, because the sanding was finished this afternoon. In speaking with Dave daily, Bob has acknowledged throughout the process what he should have done differently. If he ever does this type of job again, we’re sure he’ll do it even better. Bob is a good worker and learns from his efforts. The other guy did a lot of sitting and half-hearted sanding. It stinks to have to pay $45/hour/person for amateur work, but pay we shall. 

On the upside, Dave and Bob bonded a little. On Friday, Dave had given Bob a spare solar panel we’d gotten for free but couldn’t use. When Dave bought the sanders, he told Bob he could keep one after the work was done. During their drive, they discovered a shared love of hunting. Bob hunts wild boar on the island, a lot of wild boar. He gifted us with 8 pounds of boar meat! We do meet some mighty nice folk on our travels.

 That was just one bump in the road.

Our windlass needed attention. (For you non-boaters, the windlass raises and lowers our anchor and chain). Dave came prepared with a rebuild kit. The job took longer than anticipated. Dave not only did the anticipated rebuild, but also a lot of correcting of things that were poorly done when it was initially built. The windlass had also been installed poorly, so he improved that before reinstalling it. I even got to play a role in this, doing a small epoxy repair job on the mounting base. Monday night, just after sunset, it was reinstalled and we tested it. As Dave punched the up and down buttons, the lights inside Lady flickered on and off. In addition, the anchor went down, but not back up. It also made some unfortunate, complaining sounds. There’s also a way to crank the gypsy (the part the chain links sit in) manually with a handle should the motor die, and that wasn’t working. Ack! By early Tuesday afternoon, Dave had it sorted. Our windlass works now!

The flickering lights during our windlass test, were the result of another bump in the road. Our 12V golf cart batteries run the house load of fridge, freezer, lights, stereo, dinghy lift and windlass. Their capacity was basically non-existent, so the windlass calling for all that power tanked them, causing the lights to go off. Dave had purchased two 12V car batteries last year, so he switched the wiring to those. They’re temporary, because their capacity is not as high as a that of healthy golf cart batteries. Unfortunately, nobody sells golf cart batteries on this island, so we’ll probably have to buy those in Guadeloupe.

Still with me? I have two more bumps to go.

Bump #4 was our replacement multifunction display (the chart plotter that allows us to set routes and navigate, see our speed and depth). The original started delaminating last year, which turned out to be a warranty issue. So last June Dave removed it, lugged it home, and shipped it back to Garmin who sent us a new, bigger and better replacement for free! Too bad they sent us the wrong model. We have front and side scan sonar transducers and a depth sounder. The multifunction display they sent does not have the proper ports for these. Depth is an important thing to know, especially when traversing or anchoring in shallow areas. Dave was able to connect the front scan sonar which can also serve as a depth reader. It’s not ideal, but if Garmin can’t (or won’t) ship the correct display to the Caribbean on their dime, the exchange will have to wait until we’re back in the U.S.

The final (for now) bump in the road was the theft of the gas can out of our dinghy. Had we not stupidly left the gas can in our dinghy, unlocked, it wouldn’t have been stolen. Mea culpa. Fortunately for us, the local Budget Marine store had one in stock. Off we went to Basseterre today to purchase said gas can and requisite attachments, as well as a couple of unrelated items we needed. This trip also provided us with the opportunity to eat at one of our favorite local restaurants, El Freddo. It wasn’t a bad way to spend a few hours today.

Upon our return to the boat yard this afternoon, we learned that the bottom work is finished, the power wash has been started and will be completed in the morning, and they can launch us tomorrow, although they have to schedule us around two other boats being launched. Bob needs about 2 hours while Lady is in the lift slings to copper coat the areas where she was resting on the jack stands. They won’t be able to be sanded smooth afterward, but it’s better than not having those areas coated at all. If all goes well, we should be in the water by late afternoon. They have an open slip at a rickety old dock that we can stay at for a night or two while we do our provisioning runs. 

Perhaps by the next time I post, we’ll be someplace more interesting. This season we hope to visit, in no particular order, Nevis, Montserrat, Dominica, Guadeloupe and Antigua. I will, of course, keep you posted. 

Until next time, stay safe and take care of each other! 

St. Kitt’s to USVI- following seas & dolphins!

We finally got our chance to leave St. Kitt’s, only not for St. Martin, as we’d originally planned. The conditions just weren’t conducive for that NNW course and wasn’t going to be for the foreseeable future, 1-2 more weeks. The conditions were good, however, for going straight to the USVI, so we took it.

It’s been a long time since we’ve made an overnight passage with following seas. I’d forgotten that winds 12-18 gusting to 23 with 4-6’ seas, even on a short period, are fine when they’re on your stern pushing you forward. For the past few years, conditions like that were a no-go because we were most likely going to be heading into them and getting slammed. It took my brain a while to embrace the reality. A phone call with Chris Parker (weather router we use) helped, because he confirmed the weather window and that it would hold more than long enough for us to get to St. Thomas, 141 nm away. We hauled anchor in Basseterre, St. Kitt’s at 5am on Saturday morning, 1/20 and arrived at the mouth of St. Thomas Harbor, USVI about 7am Sunday morning.

The passage was blissfully uneventful. Well, there were no bad events. There was one really wonderful event- a visit from a very large pod of dolphins just before sunset. There had to be at least 3 dozen of them playing in our bow waves, riding the surges that funneled between our bows from the stern, and jumping in the waves all around us. It was amazing! They stayed with us for about 15 minutes before the final stragglers peeled off. It was partly cloudy, but there was a brilliant half-moon and we could see a fair amount of stars. The light reflected off the clouds, lighting our horizon such that it was never pitch dark. I personally do not enjoy pitch dark night crossings, so I was quite happy being able to actually see all around us.

We were making 6 knots with our motors set at only about 4kW each. A fish hit one of Dave’s lines, so we had to slow down to reel it in. He cut back the power on the motors, but we were still moving too fast. We had to actually stop both motors to reel in the fish and we were still making 2 kts. That’s some push we were getting! We would repeat this one more time before Dave gave up on fishing, because both times it was just barracuda. When I came up for the 12-3am watch, I cut our speed down to 4.5 kts because we were going to arrive in the dark, which is not good for anchoring. Dave cut our speed even further when he came on at 3am, and by the time we were about 2-3 nm out from the harbor, the motors were set at about 1kW each because the sun still hadn’t risen. 

The sun rose just before 7am, but a cruise ship was also arriving. The pilot boat waved us off from the harbor entrance. We could have entered and anchored before the cruise ship got there, but whatever. Instead of waiting out the cruise ship, we altered course to the western entrance to the harbor and went in that way. We were anchored in 15’ of water just east of the Coast Guard dock by 8am. I ran up our Q-flag and submitted our entry via the CBP Roam app. Then I started tidying up the boat from all our passage gear and snacks while Dave tried to catch a nap. I awaited the call from Customs. The call never came, but an email did, about an hour after I submitted our entry (it was Sunday, after all). Welcome to the USVI; enjoy your stay! We were officially cleared in, so I replaced the Q-flag with the USVI courtesy flag and had breakfast. We just relaxed the rest of Sunday and slept pretty hard that night. 

As I write this on 1/24, we are still anchored in the same place. We’ve done some planning and reconnaissance for collecting our new lithium batteries and doing a big provisioning run. Hopefully tomorrow we will start acting on all that. Hopefully early next week our new batteries will be successfully installed and we can give them a good test run by heading to another anchorage. Please keep your fingers crossed for us.

Until next time, stay safe and take care of each other!

Back with Indigo Lady in St. Kitt’s

We arrived in St. Kitt’s on January 4th to find that Indigo Lady survived hurricane season very nicely at St. Kitt’s Marine Works. She had been moved just that day from her hurricane storage spot to the work portion of the boat yard, and a hard-working boat yard employee had just that day started on the list of work that needed to be done to her. We had expected the work to be done before Christmas, but that’s island time for you. So much for being launched on the 8th as we’d hoped.

We had incurred a small hole, above the water line, on the outside of her port sugar scoop last year in the Bahamas, but Kyle had also noticed water dripping from the starboard bow, where he discovered a crack. Thank goodness Kyle is observant! He repaired both nicely. He also painted on a new boot stripe (that marks the water line of the boat), buffed her entire hull and cabin exteriors, sanded her bottom paint to expose the copper (though not as much as Dave had hoped), and gave her a thorough external wash. Then we just had to wait for the travel lift to be repaired (again) so they could put her in the water. That finally happened on January 11th. That’s only three days later than we’d hoped, so not too bad. What was bad was the bill for the work Kyle did. We obviously misunderstood the fee structure for work in the boatyard and the bill ended up being triple what we’d expected- yikes! Lesson learned, get estimates and yard rates in writing!

Other than a slight launch delay and a bigger than expected bill, that part went okay. Also, when we first opened her up, Lady had no mold. Amen to that! Being a dusty, dry boat yard, she did have a layer of grit over everything that I couldn’t even consider cleaning until she was back in the water and away from the source of the grit. That was a bit frustrating for me because it meant I couldn’t do much unpacking and setting up. Holding pattern. The cabins themselves seemed to have little to no gritty covering, so I was able to clean our cabin and unpack and stow our clothing properly. Otherwise, I spent my time inventorying the food and other personal items left onboard so I could create this season’s provisioning list, and I tended to our “tech stuff,” like activating our IridiumGo (satellite phone) and conducting an SOS test, and upgrading our weather routing package. 

While I tended to that stuff, Dave tended to our frustrating battery systems. Our lithium batteries run the motors and charge our 12V battery system. They have been losing capacity since we installed them in 2020. In case you don’t know or recall, these batteries are replacements for the original set installed in 2017. We’re replacing them again this year, only Dave will be building the batteries himself this time from cells that are awaiting us in the USVI. For now, he had to get these to play nice, and they were resisting! It took five days of near constant monitoring, plus an independent battery charger to get all eight of the lithiums fully charged and balanced. 

The 12V system runs our “house load” – fridge, freezer, lights, communications, etc. They’re kind of important. They appeared to be flat and not charging, but since Dave’s good multimeter had died, he was diagnosing blindly. Thinking the batteries needed replacing, Dave went into town (with Kyle driving) and bought replacements and a new multimeter (though not as good as its predecessor). Replacing the batteries did not solve the issue, although the act of replacing them seemed to have some positive effect, leaving Dave guessing that the issue might have to do with a specific wire or connection. At any rate, they worked well enough, but occasionally there’s a glitch.

Moving on from system woes…

St. Kitt’s Marine Works is not within walking distance of any food source. After checking into the guest house (that abuts the boat yard) and checking on Lady after our arrival, we needed to sort out dinner plus the next day’s breakfast and lunch. So we ventured to take the bus. The “buses” down her are 15-passenger vans with license plates that start with H or HA. There are a few bus stops, but mostly one stands on the side of the road and flags one down when it comes. Doing this for the first time in the dark of night is challenging, but we had at least learned about the license plate to look for. We got a bus fairly quickly on the way to the Ram’s Supermarket in Buckley, but getting one to come back took about 30 minutes and the kindness of a local man who flagged one for us successfully. Riding these buses, by the way, is like riding the Knight Bus in the third Harry Potter Movie. Yowza! Still, the fare up to Basseterre (the capital) is only $3 EC (Eastern Caribbean Dollar) or a smidge over $1 US each way per person, so it’s more economical than taxis. We feel like old pros taking the bus now. 

Between the two of us, we made several trips into town over the week that we waited for Lady to be launched. Mostly it was running errands for things we needed, like the batteries, and a couple week’s worth of food (after that first night’s excursion to the market). One day, Dave and I went into Basseterre for lunch and a walk about (and a little reconnaissance before provisioning). That was a lovely afternoon.

We launched too late on the 11th to leave the boat yard’s little harbor, so we stayed tied up there for the night. The water in there was squirrely! Our six lines and four fenders creaked and groaned all night! There was not much sleeping. Next morning we set out around 9am to head the 8 nm south to the Basseterre anchorage. We went ashore for lunch, a few more groceries, and a SIM card for more data. It sure was nice to be at anchor again. There was a gentle roll to rock our tired minds and bodies to sleep that night. Even the music ashore couldn’t keep us awake.

The morning of Saturday, the 13th, we headed another 5 nm south to Ballast Bay, right next to White House Bay where we had anchored for several days at the end of last season before having Lady hauled out. The water is calm here despite the wind, and it’s peaceful. It’s a nice respite from all the frustration of the start of the trip. There are still gremlins in our systems that occasionally poke at us, but everything is working well enough, and when it doesn’t we know the work arounds. We are waiting for a good weather window to cross to St. Martin. Until then, we will bop around this little section of St. Kitt’s.

Until next time, stay safe and take care of each other!

Caribbean Cruising Season 2023 Recap

We’re back in NH. We rolled into our driveway around 2:30am last Saturday, the 17th. Our New England boat, Dumbledore, has been launched. We’re working on getting him ready for a 4-6 week cruise along the coast of Maine starting sometime in July. Until then, we’re visiting family and friends, and getting in a bunch of appointments.

Between January and mid-June, we put on a lot of miles and visited a lot of islands. Here’s a recap.

  • Miles traveled (nm):   ~1300
  • Countries visited:        9
  • Nights at anchor:        89
  • Nights on mooring:     42
  • Nights in marinas:       16
  • Nights under way:      5
  • Nights ashore:             7

We started in the Berry Islands, Bahamas, on January 8th. After that we went to Turks & Caicos, Dominican Republic, Puerto Rico, U.S. Virgin Islands, St. Martin (both the French and Danish sides), St. Bart’s, and ended at St. Kitt’s. We stayed in 46 different anchorages, 6 different mooring fields and 6 different marinas. We took road trips with friends to Santo Domingo, DR and Old San Juan, PR. We made overnight passages from Rum Cay to Mayaguana; from Turks & Caicos to Luperón; from Luperón to Rio San Juan; from Escondido to Puerto Real, PR; and from the USVI to St. Martin.

We did a lot more “making miles” than I would have liked, but we did finally get to the actual Caribbean Sea, which was our target this year. Next season we plan to confine our travels to the area between St. Kitt’s and the Spanish Virgin islands. It will be lovely to spend multiple weeks in each country next.

Thanks for following my adventures. I will post about our coast of Maine travels this summer, but perhaps not as frequently as I typically do.

Stay safe and take care of each other!

Wrapping up in St. Kitt’s

St. Kitt’s is our final stop this cruising season. We arrived on Monday, June 5th after a long, slow, bumpy ride from St. Bart’s. We wanted to stop at St. Kitt’s Marine Works to arrange a haul out date for Indigo Lady and clear into the country. Fortunately, Customs & Immigration are right there. We’d arrived too late to clear in that night, which was fine by us. All we had energy for was slinging the hammocks and we had no need to go ashore; we could wait until morning. 

Here’s a little information about St. Kitt’s Marine Works. Most importantly, they certainly seem to know what they’re doing with respect to long term storage and, from Dave’s perusal of the yard, with respect to repair work. That’s good. Indigo Lady is probably in good hands here for the next 6 months. Their approximately 200’ x 400’ “harbor” is human made with two retaining walls of large boulders separating it from the open ocean. It contains a cement slip from which their travel lift hauls boats weighing up to 150 tons. There is also a smaller, wooden dock with several small, local fishing boats tied up to it, and a handful of mooring balls near the smaller retaining wall, near the harbor entrance. They are not a marina and there are no real amenities, although the boat yard does have a toilet and a shower. Boat owners can do their own work without any fee charged, which is kind of rare, and they can live aboard their boat while on the hard. One can also hire the Marine Works to do work to one’s boat and their fees are very reasonable. 

The Marine Works allowed us to tie up to the outside of their travel lift dock the night we arrived at St. Kitt’s, and the following one as well. The prevailing sea conditions would have made it incredibly uncomfortable to anchor in any of the nearby, open roadstead anchorages. (For those unfamiliar with the term, it’s merely a spot off land that is shallow enough to drop an anchor, but there is nothing between you and the open ocean, except more ocean.) We would have had to travel another 3+ bumpy hours to get to a protected anchorage, which would have had us anchoring after sunset. Then we would have had to backtrack the next day to clear in and talk to the Marine Works folks. So we stayed on the Marine Works dock. We spent most of our time in the hammocks reading and napping. Long, bumpy cruises are exhausting. We cleared in the next morning. Dave talked to the boat yard manager to arrange the haul out and some work we wanted done to the boat. We arranged to be hauled out on Monday, June 12th. So what to do with the interceding five days?

At the end of the past two cruising seasons, we’ve done as much cleanup and hurricane storage prep as possible while at anchor. This ensures we’re always nose into the wind to keep us cool while we work, and we can also swim and cool off. So, on Wednesday morning we cruised about 12 nm down to the southeast peninsula of St. Kitt’s to the White House anchorage. It’s a quiet, lovely spot and we’d read there was decent snorkeling along the rocky shore. Each day we were there we would work from mid-morning until about 3pm, then we’d go for a snorkel, then swing in the hammocks reading and napping until dinner, followed by a movie before going to bed. We gave the boat a deep clean- airing out the mattress toppers and mattresses, vacuuming every nook and cranny, washing the walls with a vinegar solution, cleaning out every food storage location and inventorying what we have left for non-perishables. Dave has his own separate list of boat stuff that needs doing and started on that as well. I prepped our final meals so that when we were working on Lady in the boat yard, all we’d have to do was microwave lunch and dinner. It was tiring but rewarding. Then on Sunday afternoon, we hauled anchor and went back to the Marine Works to tie up to their cement dock again in preparation for being hauled out the next morning.

The travel lift came for us at 11am Monday morning. We stayed onboard while they lifted us out of the water, which is a strange feeling, being suspended in the air. They paused near the diesel pump so we could top off our tank. Then they drove us up into the yard where they power washed our hulls of the accumulated sea life that had grown there. They did a marvelous job! Then they brought us over to our storage spot in the field, lined us up, brought over the backhoe to finalize the dug trenches in which Lady’s keels would sit atop old tires, then they finally set us down. All told, we were suspended in Lady about four hours. I got a lot of organizing and packing done during that time. We were finally able to check into the guest house we had rented for our final few days buttoning up Lady while on the hard. Thankfully it’s only 0.1 mile from our boat’s location, because it took us two trips to bring everything we needed to have up there. We were beat! We hadn’t done much work that day, but the prior five days of work, plus the underlying stress of knowing the boat was going to be hauled onto land got to us. We were a waste of space after we settled in at the guest house. We were in bed by 8:00pm and sound asleep by 8:05!  

Over the next two days we spent long hours finishing our boat closeup tasks. For Dave, that was a lot of time working in the blazing heat and sun on, in, and under Indigo Lady. I spent a lot of time doing laundry up at the guest house, interspersed with stowing our clothes, bedding, etc., onboard. A big downside of St. Kitt’s is that they burn trash on the island. St. Kitt’s Marine Works is downwind of this. It also hasn’t rained much here, so everything is dry and brown, and the persistent trade winds blow dirt and dust around. This complicated the cleaning and closing process. It would have been impossible to do the necessary work without having the hatches and portholes open. Sadly, it didn’t take long for the dirt and dust to find its way inside, despite all our screens, and onto every surface. So much for all that deep cleaning we’d done earlier. We did what we could to rectify it. It was hot, sweaty work, but we made good time. By Thursday, we had only about an hour’s worth of stuff to do, mostly stowing final items, and retrieving others we needed to bring home with us. Friday morning required only a quick trip to Lady to return stuff we had used while at the guesthouse. Then we locked her up and bid her farewell until January.

Although we had almost all of Thursday to ourselves with no work to do, we lacked the energy to explore the island. It is horrendously hot and humid down here and it is horribly uncomfortable to be out of the breeze for more than 5 minutes. It takes less time than that to start sweating. I would sweat standing at the sink in front of the open window while washing dishes! Rather than exhaust ourselves tramping around the area in the heat, we holed up in the guest house with a fan pointing at each of us. I won’t lie, I was a bit bored, but that was preferable to being outside. Hopefully January will be a bit cooler, and we can take a few days to explore on land. 

I’m writing this on Thursday from the guest house. Friday we should have flown from St. Kitt’s to San Juan, then from San Juan to Boston. From there taken the bus to the C&J Trailways station where we picked up our car, which my folks had delivered there for us, and driven home. We should have been in our own bed by 2:00am. That was the plan, at least. Next time, I’ll let you know how it went. Until then, stay safe and take care of each other!